Description
| CAMERA | |
| Image sensor | Double 2 megapixel progressive scanning CMOS |
| minimum illumination | Color: 0.1Lux/F1.4, black and white: 0.01Lux/F1.4 |
| electronic shutter | Automatic, manual (1/25~1/10000) |
| Day-night conversion mode | Auto/Color/Black & White |
| camera lens | 3.6mm lens |
| Lens interface type | M12 |
| Wide dynamic | WDR (Off/Digital Wide Dynamic) |
| 3D noise reduction | Off/Low/Medium/High/High |
| defog | \ |
| mirror image | Off/horizontal mirror/vertical mirror/180 rotation/corridor mode (90 rotation, 270 rotation) |
| Backlight mode | Off/strong light suppression/backlight compensation |
| Color pattern | Standard/gorgeous/natural |
| Flame detection performance | |
| Limit of detection | Can detect the image of no more than 10 pixels of flame, available in field configuration |
| Coverage and sensitivity | In the case of indoor light intensity of 0-500lux, in the horizontal range of 70° (about 4mm corresponding focal length) １：The flame of the common liquefied gas lighter (5cm high flame) can be detected in 10 meters or more distance and alarm ； 2：For standard 2cm fire pan (gasoline and kerosene half) flame, can be detected from 25 meters away and alarm |
| Response Time | From the appearance of the flame, the maximum detection time is not more than 10 seconds, and can be increased to less than 1 second in a specific environment through the configuration of manual interface parameters. |
| Anti-interference | Under the normal downward view installation mode, there will be no false positives due to various neon lights 2 meters away, the flame scene played by the player, the flashing light, the reflected light from the ground, the mobile phone filling light, etc. |
| Subject range | Full spectrum flame detection: can detect all kinds of flame, typical combustion caused by combustion, including but not limited to kerosene, diesel, gasoline, alcohol, butane, natural gas, liquefied gas, paper, fabric, wood, organic materials and other combustible flame |
| AUDIO/VIDEO ENCODING | |
| Video compression | H.264 |
| Encoding features | NTSC ： main stream：1920×1080 @30fps， main stream：D1@30fps PAL ： main stream：1920×1080 @25fps， main stream：D1@25fps |
| Max. Resolution | 1920X1080 |
| Video bit rate | Fixed bit rate, variable bit rate (160kbps-8000kbps) |
| Video type | Composite stream/video stream |
| Audio compression | G.711u |
| Audio bit rate | 64Kbps |
| ROI | support |
| NETWORK | |
| network protocol | TCP/IP,UDP,HTTP,DHCP,RTSP,DDNS,NTP,PPPoE,UPnP,SMTP,FTP |
| Interface protocol | ONVIF, GB28181 (optional) |
| Video preview meanwhile | 5 |
| safe mode | Authorized username and password, HTTPS encryption, AES connection encryption, RTSP authentication |
| motion detection | Set the detection area, which can set multi-level sensitivity. |
| Blocking alarm | 1 zone |
| Privacy masking | 4 zones |
| Event linkage | Snapping, TF card video recording, FTP uploading or sending Email, alarm output linkage, linkage Yuntai |
| Mobile phone monitoring | Support Apple and Android system mobile phone monitoring, add binding ladder controller by scanning QR code, carry out mobile phone remote monitoring and alarm push. |
| Equipment anomaly detection | Support network cable disconnection, IP conflict and illegal access alarm. |
| Character overlay (OSD) | Title, time and date overlay, OSD color optional |
| system upgrade | Support tool upgrade and WEB-side upgrade |
| INTERFACE | |
| Network Interface | RJ45 10M/100M network adaptive |
| Audio | Built-in microphone and speaker |
| Alarm output | 1CH |
| Reset | / |
| RS485 | 1个RS485 |
| TF storage | Supports up to 128 GB, local storage on Micro SD cards |
| GENERAL | |
| Operating temperature | -20°C ~ 55°C |
| Operating humidity | 0﹪-90﹪ |
| Power supply | DC12V（External PoE is optional ） |
| Power consumption (max) | <8W |
| Dimensions(mm) | 101.99(H)*Φ118.56(D)mm |
Reviews
There are no reviews yet.